Operated exclusively via the FluvalSmart App on your mobile device, Aquasky allows you to control the light output of red, green blue and super bright 6500K white LEDs for infinite color blends.
SEE INSTRUCTION MANUAL BELOW
Operated exclusively via the FluvalSmart App on your mobile device, Aquasky allows you to control the light output of red, green blue and super bright 6500K white LEDs for infinite color blends.
SEE INSTRUCTION MANUAL BELOW
?
|
|
Fluval Aquasky LED is guaranteed against defects in material or workmanship under normal aquarium usage and service for 3 years. We reserve the right to repair or replace at our option. Failure of less than 5% of the total number of LEDS shall not be considered a defect under the terms of this warranty. This warranty does not apply to any light fixture that has been subjected to misuse, negligence or tampering or commercial use. No liability is assumed with respect to loss or damage to livestock or personal property irrespective of the cause thereof. This does not affect your statutory rights.
SELECT AN FAQ CATEGORY
First, make sure your original light settings have not been dimmed. Next, verify if your lens has any accumulation of deposits (minerals, algae, etc.), which can significantly block light passage. If this is the case, use the Fluval Lens Cleaning Kit (#A3969) on a weekly basis to ensure you are keeping light levels consistent and maintaining optimal conditions for plant or coral growth.
PAR is a measure of light energy present within the visible light spectrum. If you don’t have the required spectrum for your application, lighting power is certainly less important. Spectrum is the single most important parameter when considering lighting: color temperature and light intensity are secondary factors. To make PAR more relevant, be aware of the PAR value that the plant or coral was grown under, and match that value.
Search “FluvalSmart” and download the App for free in the Google Play store (Android) or App Store (iOS).
Click “+” and scan, select the device(s) that need to be added. Always make sure to select the red boxed check mark after selecting your light unit.
Try to reconnect first. If that fails, unplug or cut off the power to your device and make a reconnection once it’s turned on again.
When connected to the light, you will see the light setting parameters/time chart.
Click “Export” and save your customized settings.
Yes. First, enter your desired light settings on the first light and save your profile (naming it “Light 1”, for example). Next, open the second light in the app. Select the Export feature, and you should see the name of your first light setting (“Light 1”) along with any other preset light profiles. Select “Light 1” and hit the Export command: both lights will now be using the same settings.
Yes, there is a “Preview” function for this purpose. After your settings are entered, Preview shows your 24-hour light schedule in one minute.
If you have saved your previous settings, you can return/import them. Otherwise, you will need to enter them manually again.
The FluvalSmart App supports Android systems above 4.3 and iOS systems above 8.0. With the abundance of phones on the market, Fluval cannot guarantee that all customers will have the same mobile app experience. Should you find any bugs, please contact us so we can debug and release an updated version.
The default password/pin number is 000000.
If in Manual mode, the light will continue to operate as it was before powering down. If in Auto mode, once powered back on, the light will run starting from 00:00 and will require connection to a mobile device with the app to have its clock reset to the current time. If you are not present after a power failure, we recommend having someone with the app connect to your light unit and re-establish the correct time.
There is a specific function to find your light. Click the magnifying glass icon in the top right corner and the lamp will flash to present itself.
Around 40 feet (12 meters) or less.
Whether it’s in Manual or Automatic mode, the LED iMap will continue to operate in the same mode it was in before you exited.
If too many devices are showing in the device list, or you don’t need all of them any longer, you can swipe left on any row and select “remove” to delete them.
Aquasky weather effects replicate natural atmospheric events in the wild. In our studies, they had no adverse effect on the health or well-being of the fish. Please note that the use of storm/lighting effects is entirely optional, and if used, should only be done so occasionally.
Yes, provided it is a FOWLR (Fish Only With Live Rock) tank or you are keeping low light requiring coral species.
Yes, as long as they are low to medium light requiring species.
Under Auto mode, you can set-up the effects in the 24-Hour chart.
Yes, this LED is compatible with analog / mechanical timers.
Yes, as long as they are low to medium light requiring species. For plants requiring higher light levels, or for plants with red leaves, we recommend Plant Spectrum Bluetooth LEDs.
Search “FluvalSmart” and download the app for free from the Google Play store (Android) or App Store (iOS).
Click “+” to scan, and select the device(s) that need to be added. Always make sure to first select the white box next to the light’s name, and then the red circle with the white check mark at the bottom of your screen.
The FluvalSmart app supports Android systems above 4.3 and iOS systems above 9.0. With the abundance of phones on the market, Fluval cannot guarantee that all customers will have the same mobile app experience. Should you find any bugs, please contact us so we can debug and release an updated version.
If in Manual mode, the light will continue to operate as it was before powering down. If in Auto or Pro mode, once powered back on, the light will run starting from 00:00 and will require connection to a mobile device with the app to have its clock reset to the current time. If you are not present after a power failure, we recommend having someone with the app connect to your light unit and re-establish the correct time.
A playlist featuring step-by-step instructional videos for all Fluval Bluetooth LEDs and the FluvalSmart app can be found on our YouTube channel. You can also contact us at FluvalSmart@FluvalAquatics.com about the issues you’re experiencing.
When connected to the light, you can inspect the light setting parameters/time chart.
Yes, there is a “Preview” function for this purpose. After your settings are entered, Preview shows your 24-hour light schedule in one minute.
Click “Save” at the bottom of your screen to save your customized settings.
Yes, if both lights are the same model. First, enter your desired light settings on the first light and save your profile (naming it “Light 1”, for example). Next, open the second light in the app. Select the Export feature, and you should see the name of your first light setting (“Light 1”) along with any other preset light profiles. Select “Light 1” and hit the Export command: both lights will now be using the same settings.
If you have saved your previous settings, you can return/import them. Otherwise, you will need to enter them manually again.
Click the three dots at the top right corner of the screen, and then “Find”. The lamp will flash to identify itself.
If too many devices are showing in the device list, or you don’t need all of them any longer, you can swipe left on any row and select “Remove” to delete them.
Around 40 feet (12 meters).
Whether it’s in Manual, Automatic, or Pro mode, the light unit will continue to operate in the same mode it was in before you exited.