Pompe de relevage SP4

Pompe de relevage SP4

Numéro d'article : 14337 | UPC : 015561143370

Les pompes de relevage Fluval de série SP procurent un très puissant débit d’eau et peuvent être installées à l’intérieur ou à l’extérieur de l’aquarium.

Models

Besoin d'aide? Trouver des réponses: Visiter le Service à la clientèle

Caractéristiques

Powerful flow rate and head height delivery
Smart-Pump™ Technology (SP4/SP6 models) – digital system controls directional start-up, monitors RPM and shuts off unit in case of overheating
Alumina Ceramic impeller shaft and bearing prevent calcium build-up, reduce maintenance frequency and ensures longer pump life
Includes barbed fittings – compatible with North American and European fittings
Operates at a cooler temperature to avoid affecting water temperature
Able to function internally or externally of aquarium
Energy-efficient European engineering
Quiet operation
For use in freshwater or saltwater aquariums

Vidéos et articles

Mode d’emploi et garantie

Télécharger maintenant

Vous cherchez une pièce de rechange? Voir toutes les pièces de la série SP

Questions et réponses

I just purchased an SP sump pump. Should I hard plumb my aquarium or go with flexible hosing?

Fluval SP sump pumps include various fittings that allow you to consider both options. For the average hobbyist, we usually recommend flexible hosing as it has greater noise-dampening properties and requires less use of elbows and other fittings that can diminish pump output performance. It is also easier to replace, if necessary.

Why is air entering my aquarium after setting up an SP sump pump?

A bubble trap located within the sump, after the output of your skimmer, can help prevent this issue – we recommend installing one. Otherwise, the pump inlet may be drawing air from the surface. If this is the case, we recommend installing an elbow of the same diameter as your pump inlet and directing it towards the bottom of the sump.

My aquarium system’s plumbing is of a different diameter than Fluval sump pumps’ 1.25″ fittings. What should I do?

Adapters are readily available at various hardware stores and plumbing part retailers and will allow you to connect a Fluval SP sump pump to your aquarium system.

Besoin d’aide? Obtenir des réponses. Visiter le Service à la clientèle

Comparer les modèles et les spécifications

Pompe de relevage SP2

up to 950 US GPH / 3600 LPH

Article #

14335
CUP

015561143356
Capacité de l'aquarium

up to 950 US GPH / 3600 LPH
Max. Débit

950 US GPH / 3600 LPH
Max. Pression de tête

6.2 ft / 1.9 m
Puissance (120 V / 60 Hz)

58W
Dimensions

7.5″ L x 7″ W x 4.5″ H / 19 x 17.8 x 11.4 cm

Pompe de relevage SP4

up to 1822 US GPH / 6900 LPH

Article #

14337
CUP

015561143370
Capacité de l'aquarium

up to 1822 US GPH / 6900 LPH
Max. Débit

7980 US GPH / 7500 LPH
Max. Pression de tête

11.5 ft / 3.5 m
Puissance (120 V / 60 Hz)

90W
Dimensions

7.5″ L x 7″ W x 4.5″ H / 19 x 17.8 x 11.4 cm

Pompe de relevage SP6

up to 3434 US GPH / 13000 LPH

Article #

14339
CUP

015561143394
Capacité de l'aquarium

up to 3434 US GPH / 13000 LPH
Max. Débit

3250 US GPH / 13,000 LPH
Max. Pression de tête

12.1 ft / 3.7 m
Puissance (120 V / 60 Hz)

100W
Dimensions

9″ L x 7.5″ W x 4.5″ H / 22.8 x 19 x 11.4 cm

Pompe de relevage SP4